Processing parameters

26 parameters on this page.

Filter Bank

Filter Cutoff

filter_cutoff

Cutoff of the low-pass filter after the voices. Lower sounds darker.

Range: 20 – 20000
Default: 20000

Filter Resonance

filter_resonance

Resonant peak at the cutoff. Higher rings and whistles more.

Range: 0 – 1
Default: 0

Component Tolerance

component_tolerance

Random component drift in the filter. Higher sounds less precise and more analogue.

Range: 0 – 1
Default: 0

Overdrive Unit

Drive Amount

drive_amount

Saturation of the Lorenz drive in the post chain. Higher sounds more distorted.

Range: 0 – 5
Default: 0

Bias Starvation

bias_starvation

Starves the drive's supply now and then. Higher makes it sag and sputter more often.

Range: 0 – 1
Default: 0

Chaos Depth

chaos_depth

How much the Lorenz attractor modulates the drive. Higher makes the distortion move unpredictably.

Range: 0 – 1
Default: 0

Drive

drive

Master drive on the voice mix, before the post chain. Higher saturates more.

Range: 0 – 5
Default: 0

Dispersion

Chassis Material

chassis_material

Material of the body that resonates with the sound. Changes the body's tone.

Range: 0 – 1
Default: 0.5

Chassis Volume

chassis_volume

Size of the body. Higher gives lower, slightly louder resonances.

Range: 0 – 1
Default: 0.5

Spread Width

spread_width

Stereo spread of the image. Higher sounds wider.

Range: 0 – 1
Default: 0.5

Listener Proximity

listener_proximity

How close the listener sits. Higher sounds nearer and fuller.

Range: 0 – 1
Default: 0.5

Space

Space Mode

space_mode

Options: Off · Factory · Spring · Echo
Default: 0

Off: No Space effect: the sound stays dry.
Factory: A large factory hall reverb.
Spring: A spring reverb tank with its twang and chirp.
Echo: A modulated stereo echo, free or synced to the host tempo.

Space Amount

space_amount

Mix of the Space effect. Higher sounds wetter.

Range: 0 – 1
Default: 0

Factory Size

factory_size

Size of the factory room. Higher gives a longer, bigger reverb.

Range: 0 – 1
Default: 0.5
Shown: Factory Size in Space mode Factory

Machinery Clutter

machinery_clutter

Clutter in the factory room. Higher adds busier, denser reflections.

Range: 0 – 1
Default: 0.3
Shown: Machinery in Space mode Factory

Wall Impedance

wall_impedance

Hardness of the walls. Higher sounds brighter and more reflective.

Range: 0 – 1
Default: 0.5
Shown: Wall Impedance in Space mode Factory

Spring Tension

spring_tension

Tension of the reverb spring. Higher raises its twang.

Range: 0 – 1
Default: 0.5
Shown: Spring Tension in Space mode Spring

Spring Wire Stiffness

wire_stiffness

Stiffness of the wires (brush wires or spring coils, by model). Higher sounds brighter and tighter.

Range: 0 – 1
Default: 0.5
Shown: Wire Stiffness in Space mode Spring

Spring Tank Size

spring_tank_size

Size of the tank. Larger tanks sound lower.

Range: 0 – 1
Default: 0.5
Shown: Tank Size in Space mode Spring

Sync Rate

sync_rate

Locks the echo to the host tempo. Off leaves it on Delay Time.

Range: Off – 2/1
Default: Off
Shown: Sync in Space mode Echo

Delay Time

delay_time

Time between echoes. Higher spaces them further apart.

Range: 0 – 1
Default: 0.25
Shown: Delay Time in Space mode Echo

Machinery Movement

machinery_movement

How much the echo's delay wobbles. Higher sounds more warped.

Range: 0 – 1
Default: 0
Shown: Movement in Space mode Echo

High Frequency Damping

high_frequency_damping

Darkens each echo repeat. Higher rolls off more highs.

Range: 0 – 1
Default: 0.5
Shown: HF Damping in Space mode Echo

Brickwall Limiter

Analog Ceiling

analog_ceiling

The output's maximum level. Lower clips the diode stage and limiter earlier.

Range: 0.5 – 1
Default: 0.9661

Diode Softness

diode_softness

Knee of the diode stage. 0 clips hard; higher bends earlier and sounds warmer.

Range: 0 – 1
Default: 0.5

Diode Asymmetry

diode_asymmetry

Clips the negative half earlier. Higher adds even harmonics and a fuller grit.

Range: 0 – 1
Default: 0.25